RI · contractor licensing · 20 trades tracked
Rhode Island: 19/20 trades need a state license
Open-data reference from Rhode Island Contractors' Registration and Licensing Board. 95% of tracked construction trades carry a state-issued credential in this snapshot - verify live status on the board roster before you hire.
- 19/20
- Trades licensed
- 95%
- Coverage share
- 7
- Exam mandates
- #28
- Strictness rank
Rhode Island · broad-coverage lane (#24/51 by trades licensed)
Rhode Island requires a state-issued license for 19 of 20 tracked trades (95%), making it among the broadest trade-licensing regimes in this corpus - #28 on the strictness ranking (score 5.3/10).
- 19
- trades require a state license
- 7
- of those also mandate an exam
- 3
- also require a surety bond
- 5.3/10
- strictness score (rank listed above)
Source: state licensing boards · snapshot 2026-06-27. Specialty trades may still need credentials even where no statewide general contractor license exists.
Rhode Island licensing coverage
According to Rhode Island licensing-board records compiled with NCSL and NASCLA guidance, Rhode Island marks 19 of 20 tracked trades as requiring a state license (95%), strictness rank #28 (5.3/10).
According to the same board-sourced directory (snapshot 2026-06-27), Rhode Island runs a statewide licensing regime covering 19 of 20 specialty trades. Among those licensed trades, 7 also mandate an exam and 3 list a surety-bond requirement. Confirm the live board roster and classification before treating a directory row as current.
Consumer Protection Strength Score
How broadly Rhode Island regulates the trades it licenses, from 3 of 3 tracked dimensions.
- Trade licensing coverage 19 of 20 tracked trades licensed 95/100 · A
- Surety bond coverage 3 of 19 licensed trades bonded 16/100 · F
- Liability insurance coverage 19 of 19 licensed trades insured 100/100 · A
Each dimension is this state's own coverage rate over its tracked-trade universe (not a corpus percentile); a higher score means broader licensing coverage and more of those licensed trades requiring bonding/insurance.
Among 19 state-licensed trades
Trade licensing coverage
Requirement status across 20 tracked trades in Rhode Island
Source: Rhode Island licensing board · NCSL
Screens stacked on licensed trades
Among 19 state-licensed trades in Rhode Island
National placement
Where Rhode Island sits on trade-license coverage
Rhode Island licenses 19 of 20 tracked trades (corpus rank #24 of 51 by trades licensed). Highlighted bar is this state among the densest peers in the published snapshot.
Counts are trades marked required in the PlainHireCheck matrix (snapshot 2026-06-27), not live board roster size. How coverage is counted.
Licensing Board
Board Name
Rhode Island Contractors' Registration and Licensing Board
License Requirements by Trade
19 of 20 tracked trades require a license in Rhode Island. Click any trade name to see full requirements details.
| Trade | License | Exam | Bond | Insurance |
|---|---|---|---|---|
| Carpenter | ✓ | No | No | Yes |
| Demolition | ✓ | No | Yes | Yes |
| Electrician | ✓ | Yes | No | Yes |
| Elevator Mechanic | ✓ | Yes | No | Yes |
| Excavation | ✓ | No | No | Yes |
| Fire Protection | ✓ | Yes | No | Yes |
| Flooring Installer | ✓ | No | No | Yes |
| General Contractor | ✓ | No | Yes | Yes |
| Glazier | ✓ | No | No | Yes |
| HVAC Technician | ✓ | Yes | No | Yes |
| Insulation Installer | ✓ | No | No | Yes |
| Landscaper | ✓ | No | No | Yes |
| Mason | ✓ | No | No | Yes |
| Painter | ✓ | No | No | Yes |
| Pest Control | ✓ | Yes | No | Yes |
| Plumber | ✓ | Yes | No | Yes |
| Pool Contractor | - | - | - | - |
| Roofer | ✓ | No | Yes | Yes |
| Solar Installer | ✓ | Yes | No | Yes |
| Tile Setter | ✓ | No | No | Yes |
Licensed Trade Details
Carpenter
Carpentry Contractor License
License fee: $50-$200
Demolition
Demolition Contractor License
License fee: $100-$300
Electrician
Electrical Contractor/Master Electrician License
License fee: $50-$200
State-licensed in virtually all states. Journeyman to master pathway.
Elevator Mechanic
Elevator Mechanic/Contractor License
License fee: $100-$400
ASME A17.1 Safety Code. NEIEP or equivalent apprenticeship typically required.
Excavation
Excavation Contractor License
License fee: $50-$200
Fire Protection
Fire Protection System License
License fee: $100-$400
NICET certification often accepted. NFPA 13/72 knowledge tested.
Flooring Installer
Flooring Contractor License
License fee: $50-$200
General Contractor
Contractor License/Registration
License fee: $100-$200
Threshold: $1,000+. Bond required.
Glazier
Glazing Contractor License
License fee: $50-$200
HVAC Technician
HVAC Contractor License
License fee: $50-$200
EPA 608 certification required nationally for refrigerant handling.
Insulation Installer
Insulation Contractor License
License fee: $50-$200
Landscaper
Landscape Contractor License
License fee: $50-$200
Mason
Masonry Contractor License
License fee: $50-$200
Painter
Painting Contractor License
License fee: $50-$200
Pest Control
Pesticide Applicator License
License fee: $75-$250
Licensed in all 50 states + DC. EPA 7 categories: general pest, termite, fumigation, etc.
Plumber
Master Plumber License
License fee: $50-$250
Journeyman to master pathway. Some states also require contractor registration.
Roofer
Roofing Contractor License
License fee: $100-$300
High consumer complaint rates drive strict licensing in more states.
Solar Installer
Solar Contractor License (+ Electrical)
License fee: $150-$400
NABCEP certification highly recommended. Electrical license often also required.
Tile Setter
Tile Contractor License
License fee: $50-$200
Rhode Island barrier stack · broad-coverage lane
Rhode Island sits in the broad-coverage lane at #24/51 by trades licensed: 19 of 20 tracked trades carry a state credential (95%). Strictness rank #28 (5.3/10). Among those licensed trades, 7 mandate an exam, 3 a surety bond, 19 a liability floor, and 7 continuing-education hours , pointing to insurance-focused (19/19 set liability floors). Confirm live credentials on the Rhode Island Contractors' Registration and Licensing Board roster before hire.
Source: National Conference of State Legislatures (NCSL) Contractor Licensing Tracker + state licensing board public records Rhode Island contractor licensing requirements (trade-by-trade) + national strictness composite · 2026 State licensing boards update requirements rotationally; PlainHireCheck cross-references NCSL aggregated data with each state board's public roster. Strictness composite weights license breadth, exam mandates, bond size, insurance floors, and continuing-education obligations.
Quick Facts
Trade-Specific Requirements
Coverage peers
States whose licensed-trade counts sit nearest to Rhode Island's 19/20, not a fixed guide strip.
- Alaska 16/20 · Δ0
- Maryland 16/20 · Δ0
- Michigan 16/20 · Δ0
- Mississippi 16/20 · Δ0
- Arkansas 15/20 · Δ1
Disclaimer: This data is for informational purposes only. Requirements change, always verify directly with Rhode Island Contractors' Registration and Licensing Board before hiring.
Read our methodology - how this data is sourced, computed, and verified.
Nationwide states with similar coverage or strictness
Two peer sets for Rhode Island: licensed-trade count and composite strictness score, distinct from the sidebar coverage peers above.
Similar trade coverage
Nearest nationwide jurisdictions by count of tracked trades requiring a state license (19/20 here).
- Alaska · 16/20 trades
- Maryland · 16/20 trades
- Michigan · 16/20 trades
- Mississippi · 16/20 trades
Similar strictness composite
Nearest nationwide jurisdictions by contractor-licensing strictness score (5.3/10 here).
- Alaska · 5.5/10 strictness
- Connecticut · 5.5/10 strictness
- Kentucky · 5.0/10 strictness
- Arkansas · 5.8/10 strictness
| Publisher | PlainHireCheck |
| Sources | Public state contractor licensing board records |